Fluke DSP-2000 Manual de usuario descargar pdf (Pagina 183)

Tests Run per Test Standard During an Autotest

C-5

Table C-1. Tests Run per Test Standard During an Autotest (continued)

Test Standard

Attenuation ACR Return Loss

Prop.

Delay

Skew

Coax Cables

IEEE 10BaseT ■ 5-10 MHz

100BaseTX ■ 16 MHz ■ 1-80 MHz

100BaseT4 ■ 2-12.5 MHz ■■

IEEE 802.12 4-UTP ■ 1-15 MHz ■■

IEEE 802.12 STP ■ 1-100 MHz ■ 1-100 MHz ■

TokenRing, 4 Mb/s ■ 4 MHz ■ 1-12 MHz

TokenRing,16 Mb/s, Passive ■ 16 MHz ■ 1-25 MHz

TokenRing,16 Mb/s, Active ■ 16 MHz ■ 1-25 MHz

TP-PMD ■ 16 MHz ■ 1-80 MHz

Twin-Ax: RJ45 pins 4, 5, S

ARCnet

Aus/NZ Class C Channel ■ 1-16 MHz ❒

Aus/NZ Class D Channel ■ 1-100 MHz ■ 1-100 MHz ❒

Aus/NZ Class C Basic Link ■ 1-16 MHz ❒

Aus/NZ Class D Basic Link ■ 1-100 MHz ■ 1-100 MHz ❒

All Tests ■ 1-100 MHz ■ 1-100 MHz ■ 1-100 MHz ❒❒

■

❒

Test standards version 4.0.

Resistance, propagation delay, and delay skew are always measured; results appear on printed test

reports.

Pass/Fail result given.

Pass/Warning result given.

Results within the accuracy specifications of the test tool are marked with an asterisk.

NEXT test is run but not displayed. Results are used to calculate ACR.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 195 196

Sin comentarios

Fluke DSP-2000 Manual de usuario Pagina 183