Fluke Work Light 39 Manual de usuario descargar pdf (Pagina 10)

• When using the voltage test leads, keep your fingers away from the probe

contacts. Keep your fingers behind the finger guards on the probes.

• Use caution when measuring above 60V-dc or 30V-ac rms. Such voltages

pose a shock hazard.

AC Current Probe Safety Guidelines

Follow these safety guidelines when using the AC Current Probe:

•

Never use the 80i-500s current probe on circuits rated higher than

600V. Use extreme caution when clamping the current probe around un-

insulated conductors or bus bars.

• Keep your fingers behind the finger guard on the 80i-500s.

• Check the magnetic mating surfaces of the probe jaws; these should be

free of dirt, dust, rust, or other foreign matter.

• Do not use a current probe that has been cracked or damaged or has de-

fective leads. If there is any such sign of impaired operation, tape the

probe shut to prevent operation.

• The 80i-500s has been designed and tested according to IEC 1010-1:1992

and other safety standards. Follow all warnings to ensure safe operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 73 74

Sin comentarios

Fluke Work Light 39 Manual de usuario Pagina 10