Fluke Impact Driver PN 650454 Manual de usuario

Busca en linea o descarga Manual de usuario para De medición, control y control Fluke Impact Driver PN 650454. Fluke Impact Driver PN 650454 User's Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
70/73 English Instruction Sheet
Page
1
®
70/73
Series III Multimeter
Instruction Sheet
W Read First: Safety Information
To ensure that the meter is used safely, follow these instructions:
Never use the meter if the meter or test leads look damaged.
Be sure the test leads and rotary switch are in the correct
position for the desired measurement.
Never measure resistance in a circuit when power is applied.
Never touch the probes to a voltage source when the test
leads are plugged into the 10 A or 300 mA input jack.
To avoid damage or injury, never use the meter on circuits that
exceed 4800 volt-amps.
Never apply more than the rated voltage between any input
jack and earth ground.
Be careful when working with voltages above 60 V dc or 30 V
ac rms. Such voltages pose a shock hazard.
Keep your fingers behind the finger guards on the test probes
when making measurements.
Warning
To avoid false readings, which could lead to
possible electric shock or personal injury, replace
the battery as soon as the battery indicator (N)
appears.
Symbols
W
Read First: Safety Information
Z
Manual Range or Automatic Touch Hold mode
T
Double Insulation
CAT II
Overvoltage Installation Category per IEC 1010-1.
Typical CAT II locations include main wall outlets,
local appliances, and portable equipment.
PN 650454 August 1997 Rev.2, 2/98
1997, 1998 Fluke Corporation. All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.
Vista de pagina 0
1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - Series III Multimeter

70/73 English Instruction SheetPage 1®70/73Series III MultimeterInstruction SheetW Read First: Safety InformationTo ensure that the meter is used safe

Pagina 2 - Common Terminal

70/73 English Instruction SheetPage 10Electromagnetic Compatibilityin RF field of 3 V/m on allfunctions except MΩTotal accuracy = Specified accuracypl

Pagina 3 - W Warning

70/73 English Instruction SheetPage 11Function Range Accuracy0L3.200 V, 32.00 V, 320.0 V600 V±(0.3%+1)±(0.4%+1)mL320.0 mV ±(0.3%+1)K (45 to 500 Hz, 3.

Pagina 4

70/73 English Instruction SheetPage 12Overload protection for all functions and ranges: 600 V.Function Input Impedance (Nominal)L, mL, K>10 MΩ, <

Pagina 5 - Diode Test

70/73 English Instruction SheetPage 2Input Jacks300mA10ACOMFUSEDV!MilliampsAmps Volts, Ohms, Diode TestCommon Terminal600V7070hr2f.epsSee Specificatio

Pagina 6 - Continuity Test

70/73 English Instruction SheetPage 3Automatic Touch Hold ModeW WarningTo avoid electric shock, do not use the Touch Holdto determine if a circuit w

Pagina 7 - Maintenance

70/73 English Instruction SheetPage 4StandbyIf the meter is on but is inactive for an hour (20 minutes in diodetest), the screen goes blank and displa

Pagina 8 - Internal Fuse Test

70/73 English Instruction SheetPage 5Diode Test (G)Forward BiasSingle BeepReverse BiasShortedOpenorGood DiodeBad Diode+_+_Bad Diode+_Good Diode+_hr7f.

Pagina 9 - Specifications

70/73 English Instruction SheetPage 6Continuity Test ( R )+_+_hr5f.epsIf continuity exists (resistance < 210 Ω), the beeper soundscontinuously. The

Pagina 10

70/73 English Instruction SheetPage 7HolsterThe snap-on holster absorbs shocks and protects the meter andcomes with a Flex-Stand. To protect the fron

Pagina 11

70/73 English Instruction SheetPage 8Internal Fuse Test300 mA Ω5-8Ω <0.5OK OK10 AOK70OKhr10f.epsBattery and Fuse ReplacementNoteBefore openi

Pagina 12

70/73 English Instruction SheetPage 9CleaningTo clean the meter, use a damp cloth and mild detergent; do notuse abrasives or solvents on the meter.Ser

Comentarios a estos manuales

Sin comentarios