Fluke Digital Multimeter 80 Series V Manual de usuario descargar pdf (Pagina 11)

Digital Multimeter

Precautions and Safety Information

• When making electrical connections, connect the common

test lead before connecting the live test lead; when

disconnecting, disconnect the live test lead before

disconnecting the common test lead.

• Do not use the Meter if it operates abnormally. Protection

may be impaired. When in doubt, have the Meter serviced.

• Do not operate the Meter around explosive gas, vapor, or

dust.

• Use only a single 9 V battery, properly installed in the Meter

case, to power the Meter.

• When servicing the Meter, use only specified replacement

parts.

• When using probes, keep fingers behind the finger guards

on the probes.

• Do not use the Low Pass Filter option to verify the presence

of hazardous voltages. Voltages greater than what is

indicated may be present. Make a voltage measurement

without the filter to detect the possible presence of

hazardous voltage, then select the filter function.

XCaution

To avoid possible damage to the Meter or to the equipment

under test, follow these guidelines:

• Disconnect circuit power and discharge all high-voltage

capacitors before testing resistance, continuity, diodes, or

capacitance.

• Before measuring current, check the Meter's fuses.

See " Testing the Fuses”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

Fluke Digital Multimeter 80 Series V Manual de usuario Pagina 11