Fluke LinkRunner Especificaciones descargar pdf (Pagina 30)

Using the PoE Feature

Power over Ethernet (PoE) is disabled by default. To enable

PoE, select Tools > PoE Configuration, and check Enable

PoE. Select the Power Sourcing Equipment (PSE) class to

verify.

If the LinkRunner is an LRAT-2000 model, you also have the

option of enabling TruePower™. TruePower applies a load

equivalent to the selected class to mimic a Powered Device

(PD). See Figures 20 and 21.

ffy47.png

Figure 20. PoE Configuration on LRAT-1000

ffy48.png

Figure 21. PoE Configuration on LRAT-2000

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Sin comentarios

Fluke LinkRunner Especificaciones Pagina 30