Fluke LinkRunner Especificaciones descargar pdf (Pagina 15)

LinkRunner AT 1000/2000 Network Auto-Tester

Users Manual

AA Battery

The typical battery life is approximately 3 hours. In Figure 4,

steps 1-3 show how to install the AA battery pack and step

4 shows how to change the batteries in the installed battery

pack.

ffy16.png

Figure 4. How to Install the AA Battery Pack and Change

Batteries

Common Questions LR-AT Can Solve

First connect an RJ-45 or fiber cable (2000 model only) from

the network hub or wall plate to the LinkRunner AT RJ-45

LAN or fiber port. Check the following list of questions and

associated answers to see how LinkRunner AT can help you

get the job done.

Common Questions

Q > Is this a good RJ45 Ethernet cable?

A > Use Cable testing and the built in wiremap for patch

cables, or an external Wireview

Office Locator.

Q > Am I receiving a good fiber signal?

A > Connect to your network via a SFP adapter and

validate the signal strength and link in the Switch screen.

Q >Where does this RJ45 cable go?

A >Use the Cable test toner function, Switch > Flash Port

function, or Switch discovery protocol.

Q > Is this cable hooked up to anything?

A > Select Switch to identify an open cable, an active

link, an un-powered network device or telephone

voltage.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Sin comentarios

Fluke LinkRunner Especificaciones Pagina 15