Fluke Data Acquisition System/Data Logging System 2680A Manual de usuario descargar pdf (Pagina 57)

Getting Started

Managing Your Network Using Fluke DAQ

4. Select a computed channel and the Computed Channel settings dialog appears.

alg119s.bmp

The dialog box entries include:

CH #

Computed channels are assigned channel numbers from 901 to 960.

Label

Use the label field to identify where the computed channel is used.

Unit Label

The value to apply to the label. For example, you may want the calculated

value shown as Watts.

Function

You can take the average reading from one channel, subtract the measurement

of one channel from the measurement of another channel, or generate an

equation based on measurements.

Alarm Type

Use Normal alarm if the measurement goes above or below the Alarm 1 or

Alarm 2 level. Use Band to alarm if the signal falls between two levels.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Sin comentarios

Fluke Data Acquisition System/Data Logging System 2680A Manual de usuario Pagina 57