Fluke LRAT-1000 Ficha de datos descargar pdf (Pagina 4)

TruePower™ PoE Loading

Verify you are receiving the required current and voltage up to 25.5W to power your PoE

enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that

your PoE enabled devices will have the required power to function.

AutoTest

Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical

network tests in profiles to run every time. Tests include:

PoE (copper only) class

Link speed and duplex(actual and advertised)

RX pair and polarity

802.1x authentication

Switch name, port, VLAN, model and IP

DHCP auto-negotiation with subnet and DHCP server addresses

IPv4 and IPv6 availability

Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity

Verify connectivity to key devices with ping and TCP connectivity testing. Devices

automatically include a router, DNS server and DHCP server. Configure 10 additional devices

to meet your requirements by URL or IPv4/ IPv6 address and optional application port

number.

Reflector

The LinkRunner packet reflector mode allows it to be used as a remote device during

throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports

packet reflection for:

OptiView XG Network Analysis Tablet

OneTouch

™

AT Network Assistant

EtherScope

™

Network Assistant

MetroScope

™

Service Provider Assistant

4 of 8

1 2 3 4 5 6 7 8

Sin comentarios

Fluke LRAT-1000 Ficha de datos Pagina 4