Fluke Thermometer 80T-IR Manual de usuario

Busca en linea o descarga Manual de usuario para No Fluke Thermometer 80T-IR. Fluke Thermometer 80T-IR User's Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
®
80T-IR/E
Extended Range Infrared
Temperature Probe
Instruction Sheet
Introduction
The Fluke 80T-IR/E Extended Range Infrared
Temperature Probe (the probe) is a noncontact
temperature measurement accessory for use with a test
instrument capable of measuring DC volts in the
millivolt range such as a digital multimeter (DMM). The
probe has a temperature range of 32°F to 1000°F, with
a basic accuracy of 3% of reading, and an output of 1
mV dc per °F.
Temperature is measured by pointing the probe at the
surface to be measured, and reading the temperature
on the test instrument display.
Box Contents
Temperature Probe, Battery (installed), Instruction
Sheet, and Warranty Card.
Vista de pagina 0
1 2 3 4 5 6 7 8 9 10

Indice de contenidos

Pagina 1 - 80T-IR/E

®80T-IR/EExtended Range InfraredTemperature ProbeInstruction SheetIntroductionThe Fluke 80T-IR/E Extended Range InfraredTemperature Probe (the probe)

Pagina 2 - W WARNING

ServiceFor service information in the U.S.A., call 1-800-526-4711. Outside the U.S.A., contact the nearest FlukeService Center. To locate an authorize

Pagina 3 - Operation

Safety InformationThe 80T-IR/E complies with IEC Publication 1010-1-1990 including Amendment 1, CSA C22.2 No. 231,ANSI/ISA-S82.01 and .03 Safety Stand

Pagina 4 - Emissivity

CompatibilityThe probe is compatible with all DC millivolt measuringinstruments that have a minimum of 1 MW inputimpedance and accept safety shrouded

Pagina 5 - Distance to Spot Size Ratio

300mVVVOFF0102030300mVVVOFFAA!1000V750VFUSED10ARANGEPRESSAUTORANGE300mACOMV1 SECTOUCH HOLDAvoid touchingor holding coneON/OFF switchBattery clipBatter

Pagina 6 - Figure 2

Table 1.Display Codes Condition Action1041°F Target temperatureis over range.Select target withinprobe's specifiedtemperature range.-135°F The t

Pagina 7 - Specifications

2.50.1140.67.50.3210.8331.3mmInch002515027631305mmInchDistance to objectDiameter of spotSpot size increases with distance from the probe tip, as shown

Pagina 8 - Maintenance

Measurement Considerations· If the surface to be measured is small (13 mm (1/2in.) or less), hold the probe as close as possible tothe surface (no m

Pagina 9

Output: 1 mV/degree °FRelative Humidity: 95% RH or less @ 86°Fnoncondensing, Temp.Coef. appliesStorage Temperature: -13° to 158°F withoutbatteryPower:

Pagina 10 - Replacement Part

LIMITED WARRANTY & LIMITATION OF LIABILITYEach Fluke product is warranted to be free from defects in material andworkmanship under normal use and

Comentarios a estos manuales

Sin comentarios